Friday, 2 December 2011

Creating the video

Today I started creating my video.
I sourced my video and used premier to cut it up in specific sections that I want to use on my video.

First of all I started by importing my station logo from Photo shop to Premier. I used the same logo as the Cover and Label so that the house style of my station is portrayed  across all of the products I have created.

I then used the title tool to create the opening titles that would show at the start of my video, I decided to use opening titles so that the person who is watching the video knows instantly upon starting the video what it is and what its about.

I wanted to use the same font, Eight Track, for the titles font. However when I tried to use this font Premier displayed an error and didn't allow me to use it. So instead I decided to use a San Serif font called Aharoni which went with my style. I decided not to use a Serif font as all of my designs through out the project have been very rounded and the fonts don't have Serifs so i decided that a San Serif


I then added the sections of in the correct order that I wanted
I decided to add a dissolve effect on to the Title so that it faded out
I then, on each section of the video added an effect called Fast Blur in and fast Blur out. This gave the effect that one section of the video was blurring in to another. The reason why I used both of these effects is that they are very 'soft' and give a fading effect. I done this because I wanted it to portray radio and in radio the music usally fades from one to another and sounds like it was all meant to go togeather so I wanted to try and get this same sort of effect in the video.

The audio which was on the video was not a good quality for the final product. I therefore decided to add some background music. I picked a popular song which is played at the station 'Rihanna - we found love' which worked well with the video.

To remove the sound from the video I simply muted it by un-selecting the sound button on the audio

 



Friday, 18 November 2011

Learning Premiere Video Editing

This week we have started working with premiere video editor. To start with we learnt how to cut up video so that we could get the section of the clip that we wanted to show on our final video.

I used both the Razor tool, to cut the video directly in half and also the  adjuster handles that are on the each of each video clip that allow you to slide them to where the video starts from.
I then two clips that were shot in a medieval setting to edit them together so they cut at the correct times.


Once I had done this I use title editor to create a title for my video sequence that I then put an transition effect between the Title and the Video which looked like a door opening to reflect the door in the video.

Transition:

Next week I will start editing my video togeather for my promotional video.

Friday, 11 November 2011

Finished Cover and Label

This week I have managed to complete both my label and DVD Cover.

DVD Cover
For the cover I have used a whole selection of new editing techniques. For example on the studio photo I used a tool called blend options that I found on the layer effects this allowed me to blend the photo with the back ground and to remove some unwanted areas of the photo and also to give it a nice effect. I then changed the colour of the mic from orange to blue using the colour replacement tool so that the mic fitted in with the colour scheme of my Cover.
I also re sized and skewed a Sm radio logo and placed it on one of the monitors on the studio photo. This is so that the photo looks as if it was taken in a sm radio studio.

The photos on the back page of the presenters was mainly cut out using the magic wand tool, as many were on a black background, and the lasso tool.


I used three main fonts on my DVD cover, two of which I downloaded and installed. On the font called eight track (main logo font) I used a drop Shadow and a bevel and emboss effect to make it stand out. I also used the font nightmare hero which I applied an outer glow to and made it thin so that it made the font stand out from the background. The other font I used was Verdana. I used this on the back page as it is an easy to read font and matches the main eight track font in that it doesn't have serifs.


The original images that i used for the cover can be found here:
14/10/2011 - Joey and gilly logowww.sm-radio.com/v3/presenters
14/10/2011 - Control chart logo www.sm-radio.com/v3/presenters
14/10/2011 - DJ Flex and Five O photoswww.sm-radio.com/v3/presenters
14/10/2011 - DJ stevie bwww.sm-radio.com/v3/presenters


The CD Cover I have made with just text but using the same background as the cover and same fonts and colours to stick with the house style
The cover also has an circle with a blue outter glow which matches the sequare boarder round the cover

Original image


Now that I have completed these sections next week I plan to move on to learning how to edit videos

-----------------------------------------------------------------------------------------------

Also This week I breifly looked at Adobe Illustrator.
I followed some of the tutorials and learned how to draw use the pen tool. I then attempted to make a wave patterend back ground using a gradiented rectangle path and the pen tool.
I started to get the effect that I wanted.

Not quiet as good as the example but a good first attempt I thought

Friday, 4 November 2011

CD Label

Today I have started my CD label that goes with my CD Cover. The Reason I decided to create this after the cover is that as they are items that go together they should follow the same house style.
When Creating the Label I decided to use some of the styling from the cover on the label.

I first started out by mapping out my grid lines on my project so that I could draw an accurate CD cover size along with a 5mm bleed area.
The First lines that cross the edge of the black circle is the bleed area. Inside of this is the size of the CD, 112mm.
I then also had to work out where the area of the centre of the CD is. This is a 42mm round circle that is in the dead centre of the CD Label. I managed to work out that if I subtract 42 from 112 then that would be the circles diameter without the centre circle. So If I half 112 which is 56 then that is the point where the first edge of the inner circle should be. I then added 42 on to this which what 98 to work out where the far edge of the inner circle needed to be. I then added the guidelines in on these positions, taking in account the bleed area, to get a box in the centre of the circle which I then had to draw my inner circle in. This meant both circles had the same centre position.

After I had created the template I could then add my design to the CD Label. I decided to use a circle with a outer glow on it, similar to the rectangles with outer glows on the cover, around the CD label. This keeps the label in the same house style as the cover meaning they will go together well.

I also decided that the background of the label needed to be the same as the Coverso that it followed the same house style, the CD will be inside the case so therefore i think they need to look as if they come togeather. I used a section of the background and using the same effects; changing the HUE of the image to make it blue, and then using the smudge and blur tool too make the light blend in to the background and also lowering the opacity of it to make the light less intense


I decided that for the label I wasn't going to have images on it, I was just going to have text because the CD label had little space and I think if i added images to it it would over complicate the whole CD Label and make it look "cluttered".
I added the Website URL Around the centre circle and bent it using the Warp Text Tool, this is because when the URL was just straight it looked out of place and untidy so putting it around the centre circle made it look much more neat. I then coloured the text and put an bevel and emboss effect on the text similar to what I used on some of the text in the cover again to keep with the housestyle.
I added the station name and slogan to each side of the CD Label and using the rotate tool too rotate the name and slogan. I done this so that from what ever side you pick the CD up from you can always read what the CD is.


Friday, 28 October 2011

CD Cover continued

I have started my DVD Cover by setting up the file to the correct dimensions then setting up some guide lines so that i have the correct size 278mm wide (272mm + 3mm left edge + 3mm right edge) and 190mm high (184mm + 3mm bottom + 3mm top) . I made sure I set up the 3mm bleed area this will help me when i print out so that there are no white lines around the edges when I cut it down to Size.

I have also started using the tools for cutting out images to cut out a variety of images that I am going to use on my CD Cover. There are a few main tools I could use to cut out images, The lasso tool, the Magnetic lasso tool and the magic wand tool. Below is an example of one I used the magic wand tool with

]
I found the magic wand tool is best when the background of the image is just one colour, otherwise it selects random blocks of colour all over the background. If the background has many colours in it I used the lasso tool or the magnetic lasso tool as it doesnt work by looking at the colour it works by looking for an edge of an image and then sticking too it. I can also control if I want the tool to change dirrection by droping an ancho point by clicking once this ensures the lasso is anchored to that point and then I can go in a diffent dirrection. This is useful when going round a sharp corner on an image.



Background
For the background of the cover I have opted for a rectangle box with slightly rounded edges and a outter blue glow which gives a nice effect. I used the Outter glow settings to adjust the amount in which the glow is around the image and also the opacity of it.

I have then added a photo of a Disco light image over the top of it of the rectangle, which i changed the HUE of to make it blue, and then used the smudge and blur tool too make the light blend in to the background. I also lowered the opacity of it to make the light less intense so it doesnt distract from the main content of the cover.


I have started to add the content on to my CD Cover, I started by adding the Logo I created. I then added a photo of a radio studio and using the blend options and the rubber tool, to remove any unwanted sections of the image, I made the photo blend in to the background give it a really nice effect.



The Image on the front cover of the CD Cover still had some sharp edges on it which I wanted to remove in order to give it a better look. To do this I found that if i used the paint brush tool with the Spray paint brush I could give the edge of the image a similar effect to that of the Blend options. This meant after adjusting the blend options to how I wanted it to look I could then go round the edge of the image with the spray paint brush and remove any hard edges or unwanted sections of the image and still give it the blended effect that it has on the blend options.


Friday, 21 October 2011

Web images

This week i created a image that was sliced and had a give animation in it

  • Give slices names by double clicking on them. |Dont forget the ALT Tag
  • URL can be added. Change target to _blank to get it to open in a new window. If IFRAMEs are used I could enter the name an Iframe to get it to open in it.
  • When creating the gif animation it only looped once. To change this i have to use the small box to change it to loop forever rather than once.

Friday, 7 October 2011

Logo

I got the size of the case from the VLE and then added a 3mm bleed area to the size. I found how to add guide lines to my image and added them in the correct places to represent the bleed area and the spin of case

Today I started creating the logo. I knew what I wanted the logo to look like as one already exists for the company I am creating my DVD Cover, Label and video for, so I wanted to reproduce the logo but allow me to edit it rather than just copying and pasting.

I first used the ellipse tool to create 2 overals that where the same and put them on top of each other, I done this as I wanted both and outer glow and a drop shaddow on my logo. I added these effects, one to each ellipse. I then added some text using the fonts Eight Track Hero and Nightmare Hero which I knew where the same fonts the company used.
I have then used some effects such as bevel and emboss to make the text stand out from the background and I also used some drop shadows and the glow tool

The glow tool however proved to be a problem, in the first image the glow tool is used but is hide up behind the shape behind the text, I changed my tool selection to the drop shaddow and this fixed my problem.